svlan ethertype

Syntax

svlan ethertype ethertypeValue

no svlan ethertype

Release Information

Command introduced before JUNOSe Release 7.1.0.
88a8 keyword added in JUNOSe Release 7.1.0.

Description

In Interface Configuration mode, specifies the Ethertype of an S-VLAN. The no version restores the default value, 9100.

In Profile Configuration mode, specifies the available Ethertypes that the packet must use to create a dynamic VLAN subinterface. The no version restores the default value, autoconfig.

Options

• ethertypeValue—One of the following Ethertype values:
  • 8100—Specifies Ethertype value 0x8100, as defined in IEEE Standard 802.1q
  • 88a8—Specifies Ethertype value 0x88a8, as defined in draft IEEE Standard 802.1ad
  • 9100—Specifies Ethertype value 0x9100, which is the default for Interface Configuration mode
  • autoconfig—Specifies in a VLAN profile that the packet can use any Ethertype to create a dynamic VLAN subinterface; this is the default for Profile Configuration mode

Interface Configuration, Profile Configuration

Related Topics

• Configuring S-VLAN Tunnels for Layer 2 Services in the JUNOSe BGP and MPLS Configuration Guide

Copyright © 2008, Juniper Networks, Inc. All rights reserved. Trademark Notice.